2-122
TM 3-4230-209-30&P
2-26. PUMP BASE SKID, ENGINE MOUNT 1, ENGINE MOUNT 2 (CONT).
LOCATION/lTEM
REMARKS
ACTION
Pump Base Skid, Engine
Mount 1, Engine Mount 2/
Nut (1)
If nuts (1) have been moved or replaced, install nuts (1) into the stationary
Channel assembly (2)
part of channel assembly (2) and lay the moveable part of channel assem-
bly (2) alongside. Adjust nuts so they will aline with the drilled holes.
Hexagon head cap
Position moveable part of channel assembly (2) onto stationary part of
screw (3)
channel assembly (2) and aline holes to nuts (1). Install two hexagon head
Flat washer (4)
cap screws (3) through fiat washers (4), shock mount pads (5), moveable
Shock mount pad (5)
part of channel assembly (2) and into nuts (1).
Machine bolt (6)
Install machine bolt (6) through end of stationary part of channel
assembly (2) and into the end of the moveable part of channel
assembly (2).
Nut (7)
If nuts (7) have been moved or replaced, install nuts (7) into stationary
Channel assembly (8)
part of channel assembly (8) and lay the moveable part of channel assem-
bly (8) alongside. Adjust nuts so they will aline with the drilled holes.
Hexagon head cap
Position moveable part of channel assembly (8) onto stationary part of
screws (9)
channel assembly (8) and aline holes to nuts (7). Install two hexagon head
Lock washers (10)
cap screws (9) through lock washers (10), moveable part of channel
assembly (8), and into nuts (7).
Install machine bolt (11 ) through stationary part of channel assembly (8)
Machine bolt (11)
and into end of the moveable part of channel assembly (8).
Hexagon head cap
Insert one hexagon head cap screw (12) up from the bottom through
screw (12)
channel assembly (8), shock mount pad (13), flat washer (14), and
Shock mount pad (13)
hexagon self-locking nuts (15).
Flat washer (14)
Hexagon self-locking
nut (15)
