TM 3-4230-209-30&P
2-24
2-9. COVER PANEL ASSEMBLY (CONT).
REMARKS
ACTION
LOCATION/lTEM
Cover Panel Assembly/
Replace authorized unserviceable parts.
When gaskets are loose but not brittle or damaged, rebond to access
Gaskets
cover with adhesive. Fabricate gaskets (fig D-8) as required. Fabricate
gaskets (fig D-7) as required.
Repair access cover by straightening dents, removing rust, and repainting
Access
cover
lettering with black polyurethane coating and small paint brush. Use
green polyurethane coating to paint the access cover. Refer to
TM 43-0139.
Repaint REMOVE BEFORE OPERATING using 1-1/2 inch high lettering.
Cover Panel Assembly/
Bond gaskets (1) to back side of access cover (2) with adhesive.
Gaskets (1)
Access cover (2)
Bond gaskets (3) to back side of access cover (2) with
G a s k e t s (3)
adhesive.
Turnlock stud
Use camloc fastener tool and camloc fastener pliers to
replace turnlock stud assemblies (4), turnlock fastener
assemblies (4)
eyelets (5), and retaining rings (6).
Turnlock fastener
eyelets (5)
Retaining rings (6)