Removing/Installing Warning Light Lamp

Removing/Installing Warning Light and Electrical Connector Wire

TM-10-8415-208-12 Self-Contained Toxic Enviroment Protective Outfit-Interim (STEPO-1) Manual
Page Navigation
114

TM 10-8415-208-12 b. Installing. (1) Push new warning light (6) and bolts (5) into place on face piece (7). (2) Install washers (4) and nuts (3). (3) Perform steps b.(1) through b.(5), paragraph 3-9.2.12, to install electrical connector wire (1) to breathing tube assembly (2). 3-9.2.15 Removing/Installing Warning Light Lamp. a. Using pliers, unscrew warning lamp (1) from bracket (2). b. Screw new warning light lamp (1) into bracket (2) and tighten. 3-9.2.16 Removing/Installing Face Piece Vent Tube socket Coupling. c. Remove vent tube socket coupling (1) out of the end of face piece vent tube (2). d. Push new vent tube socket coupling (1) into the end of face piece vent tube (2). 3-59

Privacy Statement
Press Release
Contact