TM 10-8415-208-12
3-9. EMERGENCY BREATHING APPARATUS (EBA) MAINTENANCE INSTRUCTIONS. (CONT)
(6)
Insert threaded insert (3) into breathing tube assembly (1).
(7)
Using pliers, secure clamp (2) over threaded insert (3) and breathing tube assembly (1).
(8)
Refer to paragraph 3-9.2.12 and install breathing tube assembly (1) to the face piece.
3-9.2.14 Removing/Installing Warning Light and Electrical Connector Wire.
a.
Removing.
(1)
Perform steps a.(1) through a.(5), paragraph 3-9.2.12, to remove electrical connector wire (1) from
breathing tube assembly (2).
(2)
Remove nuts (3) and washers (4).
(3)
Pull bolts (5) and warning light (6) off of face piece (7).
3-58
