TM 10-8415-208-12
b.
Installing.
(1)
Install new diaphragm (4) into regulator (2) with spring seat facing out.
(2)
Gently place diaphragm spring (3) on new diaphragm (4).
(3)
Push and screw regulator cover (1) onto regulator (2) and hand tighten.
(4)
Perform steps b.(1) through b.(6), paragraph 3-9.2.6, to install the regulator.
(5)
Perform steps b.(1) through b.(5), paragraph 3-9.2.3, to install the cylinder.
(6)
Leak test the EBA and perform the Static Pressure Test and Air Flow Performance Test.
Refer to paragraphs 3-9.3.1 through 3-9.3.3.
3-9.2.8 Removing/Installing Filter Housing.
a.
Removing.
(1)
Perform steps a.(1) through a.(6), paragraph 3-9.2.3, to remove the cylinder.
3-49
