TM 10-5410-228-24
(45) Lubricate O-ring (26) with a light coating of hydraulic fluid.
(46) Install new O-ring (29) (Item 67, Appx E) on reducer (28). Ensure O-ring (29) is seated and
retained properly.
(47) Lubricate O-ring (29) with a light coating of hydraulic fluid.
(48) Coat male threads of tee (24) with hydraulic fluid.
(49) Remove plug from tube assembly (23). Check tube assembly (23) sealing surfaces for damage or
material build up. Clean any material build up with clean, lint-free cloth. If required, replace
tube assembly (23) per para 3.9.11.
(50) Install tube assembly (23) on tee (24), finger tight. Adjust position of tube assembly (23), tee
(24), and elbow (25) as required.
(51) Remove plug from tube assembly (27). Check tube assembly (27) sealing surfaces for damage or
material build up. Clean any material build up with clean, lint-free cloth. If required, replace
tube assembly (27) per para 3.9.11.
(52) Install tube assembly (27) on reducer (28), finger tight. Adjust position of tube assembly (23),
tube assembly (27), tee (24), and elbow (25) as required.
(53) Torque elbow (25) on hydraulic motor (32) to 720 20 in.-lb (60 2 ft-lb).
(54) Torque tee (24) on elbow (25) to 480 25 in.-lb (40 2 ft-lb).
(55) Torque reducer (28) on tee (24) to 480 25 in.-lb (40 2 ft-lb).
(56) Torque tube assembly (23) on tee (24) to 480 25 in.-lb (40 2 ft-lb).
(57) Torque tube assembly (27) on reducer (28) to 320 25 in.-lb (27 2 ft-lb).
3-107
