TM 10-5410-228-24
2.14.2 Filter Replacement.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools/Test Equipment:
Equipment Conditions:
Shop Equipment, Automotive Maintenance and
ECV parking brake set.
Repair (Item 38, Appendix B)
ECU work platform installed (reference TM
10-5410-228-10).
Materials/Parts:
Filter (Item 1, Appendix E)
References:
TM 10-5410-228-10
Filter (Item 2, Appendix E)
a. Removal
(1)
Lift covers, turn six allen screws (1) and remove driver side rear cover assembly (2) from ECU
(3).
Turn three screw heads (4) 90 and open hinged access door (5).
(2)
(3)
Slide filter (6) out of ECU (3). Discard filter (6).
(4)
Release ten screws (7) and remove prefilter cover assembly (8) from passenger side of ECU (3).
(5)
Slide filter (9) out of ECU (3). Discard filter (9).
b. Installation
NOTE
Note direction of airflow arrow on filter when installing.
(1)
Align new filter (9) in between rails and slide into ECU (3).
(2)
Position prefilter cover assembly (8) and secure to passenger side of ECU (3) with ten screws (7).
(3)
Align new filter (6) in between rails and slide into ECU (3).
Close hinged access door (5) and turn three screw heads (4) 90 to secure.
(4)
(5)
Position driver side rear cover assembly (2) on ECU (3) and turn six allen screws (1) to secure.
Close covers.
Figure 2-57. Filter Replacement
