TM 10-5410-228-24
(21) Secure terminal lugs (17) on terminal board assemblies TB1 and TB2 (13) with eight flat
washers (16), eight new lockwashers (15) (Item 15, Appx E) and eight nuts (14).
(22) Install cover assemblies (12) on terminal board assemblies TB1 and TB2 (13).
d. Installation (Refer to Figure 2-39)
(1)
Secure control box weld assembly (5) to LMS with six screws (9), six new lockwashers (10) (Item
17, Appx E) and six flat washers (11).
(2)
Connect cable connectors 1A4W6P1 to connector J1 (6), 1A4W7J3 to connector P3 (7), and
1A4W4P2 to connector J2 (8).
(3)
Secure control panel faceplate assembly (4) to control box weld assembly (5) with eight screws
(1), eight new lockwashers (2) (Item 16, Appx E) and eight flat washers (3).
LMS
19
5
8
(J2)
7
(P3)
J3
13
13
(TB1)
(TB2)
17
20
16
6
15
(J1)
18
P1
14
P2
11
10
12
9
A
4
3
2
9-1-M
1
2-205
