TM 10-5410-228-24
(8)
Tighten two screw (2) on alternator adjustment bracket (4).
(9)
Test tension on alternator drive belt set (7) with belt tension gage. Required pressure for a new
belt is 100 to 110 lbs. Required pressure for a used belt is 85 to 95 lbs. Adjust alternator
adjustment bracket (4) and alternator pulley (5) as necessary until tension is correct.
(10) Connect hose (1).
Follow-on maintenance: Remove tags, apply system power, perform operational test.
Change 1
2-137
