TM 10-5410-228-24
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions:
Tools/Test Equipment:
Shop Equipment, Automotive Maintenance and
ECV power off, HMT removed.
Repair (Item 38, Appendix B)
ECV parking brake set.
Materials/Parts:
Two Lockwashers (Item 20, Appendix E)
a. Removal
(1)
Tag wires and remove two bolts (1), two locknuts (2) and two ground lugs (3) from back of two
taillight assemblies (4).
(2)
Remove two bolts (5) and two washers (6) securing taillight assembly (4) to driver side or
passenger side taillight bracket (7).
(3)
Remove two screws (8), four flat washers (9), two lockwashers (10) and two nuts (11) securing
taillight bracket (7) to driver side or passenger side taillight bracket (12). Discard two
lockwashers (10).
b. Installation
(1)
Secure taillight bracket (7) to driver side or passenger side taillight bracket (12) with two screws
(8), four flat washers (9), two new lockwashers (10) and two nuts (11).
(2)
Secure taillight assembly (4) to driver side or passenger side taillight bracket (7) with two bolts
(5) and two washers (6).
(3)
Install two bolts (1), two locknuts (2) and two ground lugs (3) on back of two taillight assemblies
(4). Remove tags from wires.
8
9
12
9
10
11
5
6
1
7
3
4
2
Figure 2-10. Taillight Bracket Replacement
