TM 5-3740-218-13&PSection IV. DIRECT SUPPORT MAINTENANCE PROCEDURES5-5. KEY SWITCHBOX ASSEMBLY REPAIRThis task covers: Disassembly AssemblyA. INITIAL SETUPTools and Special Equipment:Equipment Condition:Tool Kit, 5180-00-177-7033ReferenceCondition DescriptionShop Equipment, 4910-00-754-0654Paragraph 4-16Key SwitchboxMaterials/Parts:RemovedGrommetAppendix E, Item 23Key RemovedReceptacle, FemaleAppendix E, Item 48Plug, Snap, MaleAppendix E, Item 47B. DISASSEMBLYNOTETag electrical leads prior to removal to aid in installation.(1) Remove switchbox assembly front panel (1) by removing four screws (2).(2) Remove rectifier assembly (3) by removing two nuts (4), two washers (5), and two bolts (6).(3) Disconnect electrical leads (7) from fuseholder (8), key switch (9), and oil switch (10).(4) Remove two female snap plugs (11). Discard snap plugs.(5) Remove four male snap plugs (12). Discard snap plugs.(6) Withdraw electrical leads (7) and remove grommet (13). Discard grommet.(7) Remove nut (14) and fuseholder (8).(8) Remove nut (15) and key switch (9).(9) Remove oil switch (10) by removing nut (16), lockwasher (17), and screw (18).5-8
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
