TM 5-3740-218-13&P
5-6.
STARTER MOTOR REPLACEMENT
This task covers:
Removal
Installation
A.
INITIAL SETUP
Tools and Special Equipment:
Equipment Condition:
Tool Kit, 5180-00-177-7033
Reference
Condition Description
Shop Equipment, 4910-00-754-0654
Paragraph
4-25
Spark Plug Disconnected
Paragraph
4-33
Battery Removed
Paragraph
4-22
Air Cleaner Removed
B. REMOVAL
(1)
Remove starter pulley case (1) by removing five bolts (2).
(2)
Disconnect two piggyback wires (3) from starter solenoid (4).
(3)
Remove insulator cap (5), nut (6), lockwasher (7), and power cable (8) from solenoid terminal.
(4)
Remove two bolts (9) from starter driver side housing (10). Remove starter (11).
5-12
