PUMP AND CROSSTUBE ASSEMBLY HYDRAULIC MOTOR REPLACEMENT
This task covers:
A. INITIAL SETUP
Tools and Special Equipment
Tool Kit, 5180-00-177-7033
Hydraulic Motor and
Keep work area as clean as possible to prevent contamination of pump internal
parts. Dirt or grit will damage machined surfaces, resulting in leaks or premature
Remove two nuts (1), two washers (2), and two bolts (3) that secure motor (4) to pump flange (5).
Remove pump mounting brace (6). Pump strut (7) may remain attached to pump mounting brace (6).
(3) Separate motor (4) from pump (5).