• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
PUMP AND CROSSTUBE ASSEMBLY HYDRAULIC MOTOR AND CHEMICAL PUMP ASSEMBLY REPLACEMENT - Continued
PUMP AND CROSSTUBE ASSEMBLY CHEMICAL PUMP REPLACEMENT - Continued

Operator Manual Pesticide Dispersal Unit, Multicapability, Helicopter Slung
Page Navigation
  183    184    185    186    187  188  189    190    191    192    193  
img
. . .
TM 5-3740-218-13&P
4-43.
PUMP AND CROSSTUBE ASSEMBLY CHEMICAL PUMP REPLACEMENT
This task covers:
Disassembly
Assembly
A.
INITIAL SETUP
Tools and Special Equipment
Equipment Condition:
Tool Kit, 5180-00-177-7033
Reference
Condition Description
Paragraph 4-42
Hydraulic Motor and
Chemical Pump
Assembly Removed
B.
DISASSEMBLY
(1)
Remove two nuts (1), two washers (2), and two bolts (3) that secure motor (4) to pump (5) flange.
(2)
Remove pump mounting brace (6). Pump strut (7) may remain attached to pump mounting brace (6).
(3)
Separate motor (4) from pump (5).
CAUTION
Keep work area as clean as possible to prevent contamination of pump internal
parts. Dirt or grit will damage machined surfaces, resulting in leaks or premature
pump failure.
4-116






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.