4-17. SUPPORTS - Continued
Remove eight nuts (6), four screws (7),
eight flat washers (8) and eight lock
washers (9) attaching center support
d. Remove center support (10).
e. Remove two screws (11) two flat wash-
ers (12) two lock washers (13) from sup-
ports (17) and (18).
Remove four screws (14), four flat
washers (15) and four lock washers (16)
from supports (17) and (18).
g. Remove supports (17) (18) and (5).
Dry cleaning solvent, P-D-680 or P-S-661, used to clean parts is potentially dangerous
to personnel and property. Use in a well-ventilated area as the fumes are dangerous if
inhaled. Avoid repeated and prolonged skin con- tact. Do not use near open flame or
excessive heat. Flash point of solvent is 100F. - 138F. (38C. - 59C.)
Clean all parts in an approved cleaning
solvent and dry with a clean lint-free
cloth or compressed air.