4-18. TOOL BOX - Continued
Dry cleaning solvent, P-D-680 or P-S-661, used to clean parts is potentially dangerous
to personnel and property. Use in a well-ventilated area as the fumes are dangerous if
inhaled. Avoid repeated and prolonged skin con- tact. Do not use near open flame or
excessive heat. Flash point of solvent is 100F. - 138F. (38C. - 59C.)
a. Clean tool box in an approved cleaning
solvent and dry with a clean, lint-free
cloth or compressed air.
b. Inspect the tool box for any obvious
a. Replace a damaged tool box.
a. Position tool box on skid base (6).
(2), four flat washers (3) and four nuts
(4) that attach tool box (5) to skid (6).