4-16. STARTER AND CABLES (Continued)
a. Inspect starter heater for defects.
b. Inspect wiring harness (2) and power
a. Replace defective heater by removing
b. Repair or replace defective wiring
harness (2) and power cable (3).
a. Position starter on skid base support
and install four screws (7), four lock-
washers (6), four flat washers (5) and
b. Connect terminals on power cable (3)
to starter (8).
Connect terminals on wiring harness (2)
to starter (8) and motor.
d. Install cover (1) on starter (8).