TM 5-3740-218-13&PHAND CONTROL ASSEMBLY REPAIR (CONT)B.DISASSEMBLYNOTETag all electrical leads prior to removal to aid in installation.(1)Open hand control assembly (1) by removing two screws (2) and pulling back hand control assembly cover(3).(2)Remove three nuts (4) and three washers (5) from three toggle switches (6).(3)Remove nut (7) and washer (8) from pushbutton switch (9).(4)Remove heat shrink tubing from three toggle switches (6), pushbutton switch (9), and three LED indicators(10).(5)Remove three toggle switches (6) and pushbutton switch (9) by removing solder from switch solderconnections.(6)Remove three LED indicators (10) by removing three plastic nuts (11) on outside of hand control assemblycover (3) and removing solder from solder connections.(7)Remove connector (12) by removing four screws (13).(8)Remove heat shrink tubing from connector (12) and remove solder from connector (12) at solderconnection.5-34
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
