PUMP AND CROSSTUBE ASSEMBLY SPRAY SYSTEM CONTROL REPLACEMENT

TM-5-3740-218-13P Pesticide Dispersal Unit Multicapabilty Helicopter Slung (PDU) Manual
Page Navigation
192

TM 5-3740-218-13&P 4-45. PUMP AND CROSSTUBE ASSEMBLY SPRAY SYSTEM CONTROL REPLACEMENT This task covers: Removal Installation A. INITIAL SETUP Tools and Special Equipment: Materials/Parts: Tool Kit, 5180-00-177-7033 Tape, Teflon Appendix E, Item 61 B. REMOVAL (1) Disconnect hydraulic lines from fittings (1 and 2) on top of miniactuator (3). Cap open lines. (2) Loosen clamp (4) and remove tubing (5) from recirculation suck-back (6). (3) Loosen assembly nut (7) that secures spray system control assembly (8) to nipple on strainer housing (9) and pull spray system control assembly (8) away from strainer housing (9). (4) Unscrew and remove spray system control assembly (8) from 90-degree elbow pipe (10). Remove spray system control assembly (8) from pump and crosstube. (5) Remove old teflon tape from threads of 90-degree elbow pipe (10). 4-120

Privacy Statement
Press Release
Contact