TM 5-3740-218-13&P
BUCKET ASSEMBLY REPLACEMENT (CONT)
C.
INSTALLATION
CAUTION
Bucket assembly is very heavy. Make sure lifting device is capable of supporting
weight of assembled bucket.
(1)
Attach suitable lifting device to hook assembly (1). Lift bucket assembly (2) and set in place on supporting
frame.
(2)
Align four leg weldment anchors (3) on leg weldments (4) and secure using four bolts (5), eight washers (6),
and four nuts (7).
(3)
Align four strut anchors (8) with two bucket leg weldments (4) and install four bolts (9), eight washers (10),
and four nuts (11).
(4)
Align four leg struts (12) with four bucket unions (13) and four boom strut brackets (14). Install eight bolts
(15), sixteen washers (16), and eight nuts (17).
(5)
Remove lifting device from hook assembly (1).
(6)
Install bucket wiring harness (18) on bucket assembly (2) by installing three adel clamps (19) and securing
with three bolts (20), washers (21), and nuts (22).
4-20
