TM 5-3740-218-13&P
STARTER MOTOR REPAIR (CONT)
C. ASSEMBLY
(1)
Install two new positive brushes and springs (1 and 2) and insulator (3) in center bracket of driver side housing
(4). Secure with two screws (5).
(2)
Install two new negative brushes and springs (6 and 7) in brush holder (8) and secure with two screws (9).
(3)
Replace brush holder (8) into center bracket of driver side housing (4).
(4)
Pushing brushes (1, 2, 6, and 7) apart so brushes do not interfere, install commutator (10) into center bracket of
driver side housing (4). Secure with snap ring (11).
(5)
Align commutator housing (12) and driver side housing (4) and install three screws (13).
5-16