TM 5-3740-218-13&P
CARBURETOR REPLACEMENT/REPAIR (CONT)
C.
ASSEMBLY/INSTALLATION
WARNING
Gasoline is flammable. Do not work on fuel system in presence of sparks and
open flame. Serious personal injury could result if fuel ignites.
(1)
Install dashpot check valve (1) between two pieces of vacuum tube (2).
(2)
Install new gasket (3), carburetor insulator (4), and new gasket (5) on support studs.
(3)
Install spark plug wire (6) in insulator clips.
(4)
Push governor rod (7) into hole on carburetor (8).
(5)
Install carburetor (8) on support studs.
(6)
Install throttle return spring (9).
(7)
Connect gas line (10) to carburetor (8).
(8)
Align choke assembly (11) on solenoid stay assembly (12).
(9)
Push solenoid stay assembly (12) onto support studs.
(10)
Connect vacuum tube (2) to solenoid stay assembly (12).
(11)
Install new stay assembly gasket (13).
(12)
Install air cleaner (para 4-22) and adjust carburetor idle speed as described in Adjustment, following.
4-42
