TM 5-3740-214-14
BASE ASSEMBLY MAINTENANCE
Figure 5-294. Base Assembly
a. Disassemble base assembly.
(1) Remove all attached components according to individual components disassembly procedures.
(2) Separate mounting plates and channel steel members.
b. Assemble base assembly.
(1) Assemble mounting plates and channel steel members according to illustration. Be sure to install the
special 1-1/4 x 1-1/4 inch aluminum washers under the heads of the formulation tank mounting plate bolts.
(2) Install attached components according to individual component installation procedures.
5-262
