TM 5-3740-21 4-14
ELECTRICAL PARTS GROUP (Continued)
Figure 5-246. Gapping Breaker Points
(4) Set breaker points at correct gap.
(a)
Turn flywheel by hand until points open to their widest gap.
(b)
Insert feeler gage between points.
(c)
Loosen and then tighten adjusting screw. Use 0.020 inch (0.51 mm) feeler gage.
(d)
Recheck breaker gap.
(e)
Install breaker point cover.
Figure 5-247. Engine Coil Location
5-225
