AFMAN 24-204(I)/TM 38-250/NAVSUP PUB 505/MCO P4030.19H/ DLAI 4145.325711 DECEMBER 2001A9.6. Samples of Organic Peroxides.Samples of new organic peroxides or new formulations of identifiedorganic peroxides for which complete test data is not available, and which are being transported for testing andevaluation, may be transported and assigned a PSN for organic peroxide, type C. Data available to the personoffering the material for transportation must indicate that the sample would pose a threat no greater than that of anorganic peroxide, type B, and that the control temperature, if any, is sufficiently low to prevent any dangerousdecomposition and sufficiently high to prevent any dangerous phase separation. Packaging requirements are asfollows:-The sample must be packaged according to table A9.2. or table A9.3.-The maximum quantity must not exceed 10 kg (22 pounds) per shipment.-The PSN must be organic peroxide type C, liquid; organic peroxide type C, solid; organic peroxide type C,liquid, temperature controlled; or organic peroxide type C, solid, temperature controlled, as applicable.A9.7. Packaging for Class 5.1 Liquids. Package in (see A3.3.5 for additional packaging requirements):A9.7.1. Steel drum (1A1 or 1A2), aluminum drum (1B1 or 1B2), or metal drum other than steel or aluminum (1N1or 1N2), with inside glass, earthenware, plastic, or metal receptacles.A9.7.2. Plywood drum (1D), fiber drum (1G), or plastic drum (1H1 or 1H2), with inside glass, earthenware, plastic,or metal receptacles.A9.7.3. Wooden barrel (2C2) with inside glass, earthenware, plastic, or metal receptacles. Not authorized for PG Imaterial.A9.7.4. Steel jerrican (3A1 or 3A2) or plastic jerrican (3H1 or 3H2) with inside glass, earthenware, plastic, or metalreceptacles.A9.7.5. Steel box (4A) or aluminum box (4B) with inside glass, earthenware, plastic, or metal receptacles.A9.7.6. Natural wood box (4C1 or 4C2), plywood box (4D), or reconstituted wood box (4F), with inside glass,earthenware, plastic, or metal receptacles.A9.7.7. Fiberboard box (4G) with inside glass, earthenware, plastic, or metal receptacles.A9.7.8. Expanded plastic box (4H1) or solid plastic box (4H2) with inside glass, earthenware, plastic, or metalreceptacles.A9.7.9. Steel drum (1A1 or 1A2), aluminum drum (1B1 or 1B2), or metal drum other than steel or aluminum (1N1or 1N2).A9.7.10.Plastic drum (1H1 or 1H2).A9.7.11. Wooden barrel (2C1). Not authorized for PG I material.A9.7.12. Steel jerrican (3A1 or 3A2) or plastic jerrican (3H1 or 3H2).A9.7.13.Single composite package comprised of a plastic receptacle in steel, aluminum, fiber, or plastic drum.(6HA1, 6HB1, 6HG1, or 6HH).A9.7.14. Single, composite package comprised of a plastic receptacle in steel, aluminum, wooden, plywood, orfiberboard box (6HA2, 6HB2, 6HC, 6HD2, or 6HG2).A9.7.15. Single, composite package comprised of glass, porcelain, or stoneware in steel, aluminum, or fiber drum(6PA1, 6PB1, or 6PG1).A9.7.16. Single, composite package comprised of glass, porcelain, or stoneware, in steel, aluminum, wooden, orfiberboard box (6PA2, 6PB2, 6PC, or 6PG2).A9.7.17. Single, composite package comprised of glass, porcelain, or stoneware in solid or expanded plasticpackaging (6PH1 or 6PH2).A9.7.18. Single, composite package comprised of a plastic receptacle in a plywood drum (6HD1). Not authorizedfor PG 1 material.A9.7.19. DOT specification cylinders as prescribed for any compressed gas, except DOT 8 (acetylene) and DOT3HT.A9.8. Packaging for Class 5.1 Solids. Package in (see A3.3.5):A9.8.1. Steel drum (1A1 or 1A2), aluminum drum (1B1 or 1B2), or metal drum other than steel or aluminum (1N1or 1N2), with inside glass, earthenware, plastic, or metal receptacles.A9.8.2. Plywood drum (1D), fiber drum (1G), or plastic drum (1H1 or 1H2), with inside glass, earthenware, plastic,or metal receptacles.A9.8.3.Wooden Barrel (2C2), with inside glass, earthenware, plastic, or metal receptacles.
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business