Screw (48)
Unscrew and remove three screws (48) and
Lock washer (49)
three lock washers (49) from driver
Driver pulley (50)
pulley (50). Separate lock washers (49) from
screws (48).
Setscrew (51)
Hub (52)
Screw three screws (48) into the alternate
threaded holes of driver pulley (50) and
tighten equally. This drives driver pulley (50)
away from the engine and exposes the
setscrew (51) in hub (52). Remove driver pul-
ley (50).
Power-take-off adapter (53)
Loosen the setscrew (51) in hub (52) and pull hub (52) off of power-take-
Machine key (54)
off adapter (53).
Lift machine key (54) out of the slot in power-take-off adapter (53).
2-73
TM 3-4230-209-30&P