TM 10-8415-210-13&P
5-10. REPAIR STRAPPING AND TUNNELS. (CONT)
b.
Repair Tunnels.
(1)
Probe the suspected tunnel (1) with a blunt object (such as a paper clip) (2) to measure its depth.
(2)
Use file to blunt an 18 gauge needle.
WARNING
Use maintenance kit adhesive in a well ventilated area only and avoid skin contact. Wear
proper protective equipment. Failure to do so may result in light-headedness or a burning
sensation to the eyes and skin. In case of skin contact, wash with soap and water. If vapors
become strong, leave the area and allow to ventilate.
Toluene is extremely flammable and its vapors toxic. Use toluene in a well-ventilated area
away from any source of heat. Death or severe injury may result from explosion, fire or fume
inhalation. If vapors become strong, leave area and allow to ventilate. In case of skin contact,
wash with soap and water.
(3)
Attach needle to 10 ml glass syringe and fill syringe with adhesive. Adhesive may be thinned by adding
toluene.
5-8
