TM 10-8415-208-12
(6) If bubbles are observed, replace the cylinder. Notify your supervisor.
b.
Perform steps b.(1) through b.(5), paragraph 3-9.2.3, to install the cylinder.
c.
Attach a remote air supply line to the EBA tether line connection (1).
d.
Install the dust cap (2) over the regulator outlet (3).
e.
Check the high pressure system for leaks as follows:
(1) Place your hand over the dust cap (2) and regulator outlet (3).
(2) Completely open the cylinder valve (4).
(3) Completely open the regulator valve (5).
(4) Apply a soapy water solution to locations (6), (7), (8), (9), (10), (11), (12), (13), (14), (15), (16), (17), (18), (19) and
(20).
(5) Bubbles are a positive indication of a leak. Refer to step g.
3-77
