TM 10-5410-228-24
ASSOCIATED DRAWINGS
This appendix provides drawings to assist you in troubleshooting the Chemical Biological Protective Shelter
(CBPS) System.
Figure
Title
(CAGEC) Part Number
Identifier
Page
Rear Light Box Assembly
(81337) 17-1-9365
1A4A7
CBPS Cable Interconnect Diagram
(81337) 17-1-9400
1A1/1A4
Control Box Assembly
(81337) 17-2-0748
1A4A18
ECU Connections
(81337) 17-1-9359
1A4A1
ECV Electrical Connections
(81337) 17-1-9124
1A1/A17
Forward Light Box Assembly
(81337) 17-1-9364
1A4A5
Hydraulic Manifold
(81337) 17-1-9897
1A4A1
Power Panel
(81337) 17-1-5826
1A4A9
Rear Control Panel
(81337) 17-1-9360
1A4A4
Receptacle Panel
(81337) 17-1-5824
1A4A10
Relay Box
(81337) 17-1-9358
1A4A17
R22 Refrigeration Schematic
(81337) 17-1-9898
1A4A1(R22)
System Schematic
(81337)17-1-9868
A4
Tachometer Wiring
1A1A17
Vehicle Control Box
(81337) 17-1-9363
1A4A8
Troubleshooting Interconnect Diagram
REFERENCE DESIGNATION.
Reference designations are used in this manual to identify and locate assemblies and parts in the Chemical
Biological Protective Shelter (CBPS) system. The reference designator consists of the unit designator ( 1A1
or 1A4) followed by assembly designator (A1 ) then component designator (W1, R1, C1, etc). 1A1 reference
designator identifies assemblies in the Expanded Capacity Vehicle (ECV). 1A4 reference designator
identifies assemblies of the CBPS system. The following examples shows how cables and individual wires
are identified. The reference designator in parenthesis under the reference designator on a cable indicates
the connector it is mating to.
1A4W6P2 The 1A4 identifies the unit (CBPS), W6 is cable identifier, and P2 is connector identifier.
A4K1-C2 <-> A4J1-G The unit designator is not stamped on wire. A4 identifies the assembly, K1 identifies
the component ( relay), C2 identifies pin on relay, < identifies wire end connected to pin C2, > identifies
other end of wire to pin G on connector J1 on assembly A4.
F.3
FOLDOUTS (FO).
Foldouts (FO) are oversized drawings. FO's are placed in back of manual for printing purposes. Figure
numbers are not in sequence due to moving drawings.
