TM 10-5410-228-24
2.13.33 Grab Handle Replacement.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions:
Tools/Test Equipment:
Shop Equipment, Automotive Maintenance and
ECV parking brake set.
Repair (Item 38, Appendix B)
Materials/Parts: (Cont.)
Materials/Parts:
Four Lockwashers (Item 17, Appendix E)
Rubber Gloves (Item 25, Appendix C)
Caulking Gun (Item 18, Appendix B)
Wiping Rags (Item 39, Appendix C)
Sealer (Item 50, Appendix C)
Isopropyl Alcohol (Item 12, Appendix C)
a. Removal
(1)
Remove four screws (1), four lockwashers (2), and four flat washers (3) securing grab handle (4)
to ECV mount plate (5). Discard lockwashers.
Alcohol solvents are flammable and give off harmful vapors. Use solvents sparingly and only
in well ventilated area. Avoid prolonged breathing of vapors. Keep away from heat, sparks,
open flames.
(2)
Clean adhesive residue from surface with rag dampened with alcohol.
b. Installation
(1)
Using caulking gun, apply sealer (Item 50, Appendix C) to grab handle (4).
(2)
Secure grab handle (4) to ECV mount plate (5) with four screws (1), four lockwashers (2) (Item
15, Appendix E) and four flat washers (3).
1
3
HEARING PROTECTION
4
2
REQUIRED WITHIN
25 FEET OF THIS POINT.
5
HEARING PROTECTION
REQUIRED WITHIN
25 FEET OF THIS POINT.
Figure 2-55. Grab Handle Replacement
