TM 10-5410-228-24
2.13.25 Pan Assembly Replacement Continued.
(36) Secure socket (55) to mounting pan (1) with two screws (56), two new lockwashers (57) (Item 16,
(37) Install wires on socket (55). Remove tags from wires.
(38) Install relay (54) on socket (55). Refer to Figure 2-46 for setting of time delay switches located
on back of relay (54).
(39) Secure socket (50) to mounting pan (1) with two screws (51), two new lockwashers (52) (Item 16,
(40) Install wires on socket (50). Remove tags from wires.
(41) Install relay (49) on socket (50). Refer to Figure 2-46 for setting of time delay switches located
on back of relay (49).
(42) Secure socket (45) to mounting pan (1) with two screws (46), two new lockwashers (47) (Item 16,
(43) Install wires on socket (45). Remove tags from wires.
(44) Install relay (44) on socket (45). Refer to Figure 2-46 for setting of time delay switches located
on back of relay (44).
(45) Install wires on socket (40). Remove tags from wires.
(46) Secure socket (40) to mounting pan (1) with two screws (41), two new lockwashers (42) (Item 16,
(47) Install relay (39) on socket (40). Refer to Figure 2-46 for setting of time delay switches located
on back of relay (39).
(48) Install bracket (38) with two screws (35), two new lock washers (36) (Item 16, Appx E) and two
flat washers (37).
(49) Install ground stud (10) on mounting pan (1). Install nut (28), new lockwasher (29) (Item 20,
washer (34) on ground stud (10).
(50) Secure relay (24) to mounting pan (1) with four screws (25), four new lockwashers (26) (Item 17,
NOTE
Nuts, lockwashers, and flat washers supplied with relay.
(51) Secure terminal lugs (23) and wires to relay (24) with nuts (20), lockwashers (21) and flat
washers (22). Remove tags from wires.
(52) Secure five relays (16) to mounting pan (1) with twenty screws (17), twenty new lockwashers
(18) (Item 17, Appx E) and twenty flat washers (19).
(53) Secure terminal lugs (15) and wires to five relays (16) with twenty nuts (12), twenty
lockwashers (13) and twenty flat washers (14). Remove tags from wires.
d. Installation (Refer to Figure 2-46)
(1)
Secure mounting pan (1) to rack with five screws (11).
(2)
Install hoses and connectors on back side of mounting pan (1). Remove tags.
(3)
Install flat washer (9), new lockwasher (8) (Item 20, Appx E), nut (7), flat washer (6), terminal
lug (5), flat washer (4), new lockwasher (3) (Item 20, Appx E) and wing nut (2) on ground stud
(10).
2-232
