TM 5-3740-218-13&P
MOTOR AND SLINGER ASSEMBLY REPLACEMENT
This task covers:
Removal
Installation
A.
INITIA L SETUP
Tools and Special Equipment:
Tool Kit, 5180-00-177-7033
B.
REMOVAL
(1)
Disconnect two 1/4-in. hydraulic hoses (1 and 2) at quick-disconnect fittings from back of secondary
hydraulic manifold (3). Cap open lines.
(2)
Disconnect four 1/4-in. hydraulic hoses (4) at quick-disconnect fittings from two hopper cylinders (5). Cap
open lines.
(3)
Disconnect 3/4-in. hose (6) from quick-disconnect fitting (7) on back of hydraulic filter. Cap open line.
(4)
Disconnect 1/2-in. hydraulic hose (8) from front bottom quick-disconnect fitting (9) on primary hydraulic
manifold (10). Cap open line.
(5)
Support motor and slinger assembly (11) from underneath and remove four nuts (12), eight washers (13),
and four screws (14) securing motor and slinger assembly (11) to engine platform (15). Remove motor and
slinger assembly (11).