Align secondary hydraulic manifold assembly (1) on mounting platform (2) and secure with two holddown
bolts (3), four washers (4), and two nuts (5).
Remove cap and connect outlet hydraulic hose to outlet 90-degree elbow fitting (6).
Remove cap and connect inlet hydraulic hose from primary hydraulic manifold to inlet 90-degree elbow
Remove two dust caps (8) from two quick-release fittings (9) and remove caps from hydraulic hoses.
Connect hydraulic hoses to two quick-release fittings (9) matching markings on hoses with markings on
manifold (A to A and B to B).
Connect electrical leads (10) to secondary hydraulic manifold 12 VDC coil (11).