• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
HYDRAULIC PUMP ASSEMBLY REPLACEMENT - Continued
GAS TANK ASSEMBLY REPLACEMENT/REPAIR - Continued

Operator Manual Pesticide Dispersal Unit, Multicapability, Helicopter Slung
Page Navigation
  131    132    133    134    135  136  137    138    139    140    141  
img
. . . . . . .
TM 5-3740-218-13&P
4-28.
GAS TANK ASSEMBLY REPLACEMENT/REPAIR
This task covers:
Removal
Installation
A.
INITIAL SETUP
Tools and Special Equipment:
General Safety Instructions:
Tool Kit, 5180-00-177-7033
WARNING
Materials/Parts:
Gasoline is flammable. Do not work on fuel system in
presence of sparks and open flame. Serious personal
Sealer, Pipe Joint Appendix E, Item 56
injury could result if fuel ignites.
Sealant, Thread
Appendix E, Item 55
Gasoline, Regular Appendix E, Item 19
B.
REMOVAL
WARNING
Gasoline is flammable. Do not work on fuel system in presence of sparks and
open flame. Serious personal injury could result if fuel ignites.
NOTE
Repair of gas tank assembly consists of replacement of damaged components in
accordance with the following procedures.
(1)
Close petcock (1) on fuel strainer (2).
(2)
Place suitable container under fuel strainer (2). Remove strainer bowl (3) by rotating bowl retainer nut (4)
counterclockwise.
(3)
Open petcock (1) and drain gasoline into suitable container. Replace strainer bowl (3).
(4)
Disconnect fuel hose (5) from fuel strainer (2). If required, remove male fitting (6) from fuel strainer (2).
(5)
If fuel strainer (2) needs to be replaced, remove strainer from gas tank nipple (7). If required, remove gas
tank nipple (7) from gas tank (8).
(6)
If fuel hose (5) does not need to be replaced, proceed to step 10.
(7)
If fuel hose (5) needs to be replaced, remove battery (para 4-33) and air cleaner (para 4-22).
4-64






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.