(2) Remove and disassemble separator assembly.
(a) Remove street elbow.
(b) Remove pressure relief valve.
(c) Remove separator drain valve.
(d) Remove nut washer base, O-rings and separator body.
(e) Remove nut, baffle disc, filter element and stud.
(f) Remove pipe, separator, elbow, nipple and separator cap.
(3) Remove pulley from crankshaft. Do not lose key.
(4) Remove pulsation tank and pulsation tank drain valve.
(6) Remove and disassemble air filters.
(a) Remove filter retainers.
(b) Remove filter elements and retaining screen.