• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
CARBURETOR MAINTENANCE
Figure 5-253. Carburetor Float Adjustment

TM-5-3740-214-14 Aerosol Generator Non-Thermal Insecticide Unltra-Low Volume Model XKA (NSN 374001-076-1341) Manual
Page Navigation
  378    379    380    381    382  383  384    385    386    387    388  
TM 5-3740-214-14
CARBURETOR MAINTENANCE (Continued)
Figure 5-252. Carburetor Disassembly
b. Disassemble carburetor.
(1)
Remove main fuel needle valve and spring.
(2)
Remove idle needle valve and spring.
(3)
Remove bowl retainer screw and washer and carburetor bowl, antisplash gasket, and bowl gasket.
(4)
Remove float hinge pin and float.
(5)
Remove float valve seat and float needle valve.
c.
Clean and inspect carburetor.
(1)
Cleaning. Clean carburetor parts in acetone O-A-51F or alcohol, MIL-A-37570.
(2)
Inspection.
(a) Check adjusting needle valves for damage.
5-230






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.