Table 5-3. Direct and General Support Maintenance Troubleshooting (Continued)
TEST OR INSPECTION
ENGINE DOES NOT TURN OVER (Continued)
Figure 5-56. Engine Pulley
a. Remove the starter from the engine.
Disconnect the positive (+) battery cable from the battery.
Disconnect the starter wire.
Remove the two mounting bolts and separate the starter from the engine.
b. Turn the drive pinion gear.
If it turns smoothly, go to Step 3c.
If it does not turn smoothly, go to Step 3c and check the armature shaft and bushing.
Figure 5-57. Starter Assembly SPACER