• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Chapter 5. DIRECT SUPPORT AND GENERAL SUPPORT ORGANIZATIONAL MAINTENANCE INSTRUCTIONS
Section III. PREVENTIVE MAINTENANCE CHECKS AND SERVICES

TM-5-3740-214-14 Aerosol Generator Non-Thermal Insecticide Unltra-Low Volume Model XKA (NSN 374001-076-1341) Manual
Page Navigation
  150    151    152    153    154  155  156    157    158    159    160  
TM 5-3740-214-14
Section II. SERVICE ON RECEIPT
GENERAL SERVICE
a. Make sure there are no damaged, dented or broken components. Check all glass parts for breakage.
b. Make sure all nuts, bolts and screws are securely fastened.
Figure 5-1. Hoses, Lines, and Fittings
c. Check all plastic hose fittings for tightness. Hand tighten them if they are loose.
d. Check all hoses for breaks, cracks or chafing.
MOUNTING AEROSOL GENERATOR
a. The aerosol generator is designed to be mounted on the back of an open vehicle. It is usually mounted on a
pick-up truck, but it is not restricted to use on a pick-up truck. It can be mounted directly on the vehicle or on the wooden
skid it is shipped on. The wooden skid acts as a shock absorber.
b. The aerosol generator has a remote control panel that is mounted on the cab floor of the vehicle. The hose
harness can enter the truck through an open window on the passenger side. For a more permanent mounting, a hole can
be drilled through the back of the vehicle cab for entry of the harness.
5-2






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.