• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
OPERATING PROCEDURES - Continued
Operation of the Simulator System - Continued

Simulator, Detector Uni Chemical Agent Automatic Alarm, M81 \(Nsn 6665-01-088-4789\)
Page Navigation
  30    31    32    33    34  35  36    37    38    39    40  
img
TM
3-6665-316-12
For  more  factors
affecting  transmission  and  reception,  you  should  read  US  Army
field  manual  FM
24-18,  Tactical  Single-Channel  Radio  Communications  Techniques.
NOTE
If  you  think  that  conditions  at  the  exercise
site  could  have  an  adverse  effect  on  radio
transmission  or  reception,  conduct  a  pre-
exercise  dry  run.
b.
Operation
of
the
Simulator
System
Make  sure  Assembly  and  Preparation
for
Use
Instructions
(Paragraph
1.
2-5)  have  been  performed.
2.
Repeat
Step
1
for
every
M43A1
Detector
to
be
used
in
training
exer-
cise.
No  detectors  should  be  located  more  than  1000  meters  from  transmit-
3.
No  detector  should  be  located  less  than  25  meters  from  any
ter.
other  detector.  Carefully  note  location  of  each  detector,  and
record  each  detector  location  using  UNIT  digit  recorded  on  receiver
Reset  every  detector  to  be  used  in
GROUP/UNIT  identification  plate.
training  exercise.
To  imitate  movement  of  chemical  agent  cloud,  activate  receivers
in
4.
order  of  location  (left-to-right,  closest-to­farthest,  etc.).
a.
Turn  the  transmitter  CHAN  SEL  switch  to  select  the  channel
matching  the  unit  number  of  the  receiver  which  is  to  respond.
2-17






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.