• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
PUMP UNIT ASSEMBLY. - Continued
PUMP UNIT ASSEMBLY. - Continued

Technical Manual For Decontaminating Apparatus: Power-Driven, Skid-Mounted, 500-Gallon, M12A1
Page Navigation
  39    40    41    42    43  44  45    46    47    48    49  
img
TM 3-4230-209-30&P
2-38
2-14. PUMP UNIT ASSEMBLY (CONT).
REMARKS
ACTION
LOCATION/lTEM
REASSEMBLY (CONT)
Slide throttle cable (5) into throttle clamp (6). Guide end of throttle into the
Throttle cable (5)
throttle adapter (7) and tighten setscrew (8). Tighten bolt (9) to tighten
Throttle clamp (6)
throttle clamp (6).
Throttle adapter (7)
Setscrew (8)
Bolt (9)
Route choke cable (10) underneath the frame of the pump unit sub-
Choke cable (10)
assembly and over to the carburetor as shown. Guide the preformed end
Choke lever (11 )
of the choke cable (10) through hole in choke lever (11). Position large
Clamp (12)
section of choke cable (10) into clamp (12) and tighten setscrew (13) to
Setscrew (13)
secure choke cable (10) in clamp. Attach spring (14) to choke lever (11).
Spring (14)
Use new tiedown straps (15) to secure choke cable (10) to the frame to
Tiedown straps (15)
keep it from flopping.






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.