APPENDIX C
BASIC ISSUE ITEMS LIST, ITEMS TROOP
INSTALLED OR AUTHORIZED LIST. REPAIR
PARTS AND SPECIAL TOOLS LIST
Section I. INTRODUCTION
Source codes are entered in the first and second positions of
C-1. Scope
the Uniform SMR Code format as follows:
This appendix lists basic issue items; items troop installed or
authorized; repair parts; special tools; test, measurement, and
Code
Definition
diagnostic equipment (TMDE); and other support equipment
PA
Item procured and stocked for anticipated or known
required for operation and performance of organizational,
usage.
direct support and general support maintenance of the audible
PB
Item procured and stocked for insurance purposes
alarm.
because essentiality dictates that a minimum
quantity be available in the supply systems.
C-2. General
PC
Item procured and stocked and which otherwise
The Basic Issue Items List, Items Troop Installed or
would be coded PA except that it is deteriorative
Authorized List and Repair Parts and Special Tools List are
in nature.
divided into the following sections:
PD
Support item, excluding support equipment, procured
a. Section II.
Basic Issue Items List.
(Not
for initial issue or outfitting and stocked only for
Applicable).
subsequent or additional initial issues or
outfittings.
Not
subject
to
automatic
b. Section III. Items Troop Installed or Authorized
replenishment
List. (Not Applicable).
PE
Support equipment procured and stocked for initial
issue or outfitting to specified maintenance repair
authorized for use in performance of maintenance. The list
activities.
also includes parts which must be removed for replacement of
PF
Support equipment which will not be stocked but
the authorized parts.
removed for replacement of the
which will be centrally procured on demand.
authorized parts. Parts list are composed of assembly groups
PG
Item procured and stocked to provide for sustained
in ascending numerical sequence, with the parts in each
support for the life of the equipment. It is applied
group listed in figure and item number sequence. Bulk
to an item peculiar to the equipment which,
materials are listed in FSN sequence.
because of probable discontinuance or shutdown
d. Section V. Special Tools List. (Not Applicable).
of production facilities, would prove uneconomical
to reproduce at a later time.
e. Section VI. Federal Stock Number and Part Number
KD
An item of a depot overhaul/repair kit and not
Index. A list in ascending numerical sequence of all Federal
purchased separately. Depot kit defined as a kit
stock numbers appearing in the listings followed by a list, in
that provides items required at the time of
alpha-numeric sequence, of all part numbers appearing in the
overhaul or repair.
listings. Federal stock numbers and part numbers are cross-
KF
An item of a maintenance kit and not purchased
referenced to each illustration figure and item number
separately.
Maintenance kit (defined as a kit
appearance.
that provides an item that can be replaced at
organizational
or
intermediate
levels
of
C-3. Explanation of Columns
maintenance.
The following provides an explanation of columns found in the
KB
Item Included in both a depot overhaul/repair kit and
tabular listings:
a maintenance kit. Item to be manufactured or
a. Illustration. This column is divided as follows:
fabricated at organizational level.
(1) Figure Number. Indicates the figure number
MF
Item to be manufactured or fabricated at the (direct
of the illustration in which the item is shown.
support maintenance level.
(2) Item Number. The number used to identify
MH
Item to be manufactured or fabricated at the general
each item called out in the illustration.
support maintenance level.
MD
Item to be manufactured or fabricated at the depot
b. Source, Maintenance and Recoverability Codes
maintenance level.
(SRM).
AO
Item to be assembled at organizational level.
(1) Source code. Source codes are assigned to
AF
Item to be assembled at direct support maintenance
support items to indicate the manner of acquiring support
level.
items for maintenance, repair, or overhaul of end items.
AH
Item to be assembled at general support
maintenance level.
AD
Item to be assembled at depot maintenance level.
XA
Item is not procured or stocked because the
requirements for the item will result in the
replacement of the next higher assembly.
C-1
