SECONDARY HYDRAULIC MANIFOLD ASSEMBLY REPAIR

TM-5-3740-218-13P Pesticide Dispersal Unit Multicapabilty Helicopter Slung (PDU) Manual
Page Navigation
254

TM 5-3740-218-13&P 5-9. SECONDARY HYDRAULIC MANIFOLD ASSEMBLY REPAIR This task covers: Disassembly Cleaning Solenoid Repair Flow Regulator Repair Assembly A. INITIAL SETUP Tools and Special Equipment: General Safety Instructions: Tool Kit, 5180-00-177-7033 Materials/Parts: WARNING O-Ring Appendix E, Item 41 Death or serious injury could result by repeated and/or prolonged Kit, Parts Repair Appendix E, Item 29 breathing and/or skin contact of drycleaning solvent (P-D-680). Use in Kit, Parts Repair Appendix E, Item 28 a well-ventilated area. Do not use near open flame or in excessive heat. Solvent, Drycleaning, Appendix E, Item 59 The flash point of this solvent is P-D-680 100°F-183°F (38°C-59°C). Sealant, Thread Appendix E, Item 55 Compressed air used for cleaning and drying purposes shall not exceed 30 Equipment Condition: psi. Use only with effective chip guarding and personal protective Reference Condition Description equipment (goggles/shield, gloves, etc.). Flying debris could cause Paragraph 4-32 Secondary Hydraulic personal injury debris could cause Manifold Removed 5-22

Privacy Statement
Press Release
Contact