TM 5-3740-218-13&Pd.Disassembly. Before disassembly of any item, study illustration carefully. Note relationship of internal parts.Knowing details of component will speed up disassembly andassembly and help avoid mistakes.1-20. GENERAL ASSEMBLY INSTRUCTIONSa.Preparation.Remove grease from new parts before installation.b.Gaskets.To provide added sealing for gasket, coat both sides with sealant. Remove all traces of previousgasket and sealant before installing new gasket.c.Safety Wire.Remove safety wire from all new parts before installing on equipment.d.Bearings and Shafts. During assembly of shafts and bearings in housings, first mount bearing on shaft. Theninstall assembly by applying force to shaft. When mounting bearings on shafts, always apply force to inner races ofbearing.e.Bearing Lubrication.Lubricate bearings before reassembly with type of lubricant normally used in relatedhousing or container. This will provide lubrication during first run-in until lubricant from system can reach bearings.1-14
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
