TM 5-3740-218-13&P4-40.PUMP AND CROSSTUBE ASSEMBLY LEVEL SWITCH REPLACEMENTThis task covers:RemovalInstallationA.INITIAL SETUPTools and Special Equipment:Tool Kit, 5180-00-177-7033Materials/Parts:Tie, CableAppendix E, Item 62Tape, TeflonAppendix E, Item 61Equipment Condition:ReferenceCondition DescriptionParagraph 4-39Bucket DrainedParagraph 4-39Pump and CrosstubeAssembly InstalledGeneral Safety Instructions:WARNINGMake sure all liquid has been removed from bucket beforeremoving left downspout. Do not allow liquid to contactskin or eyes. Wear protective clothing. Failure to do socould result in personal injury.B.REMOVALWARNINGMake sure all liquid has been removed from bucket before removing leftdownspout. Do not allow liquid to contact skin or eyes. Wear protective clothing.Failure to do so could result in personal injury.(1)Disconnect level switch 3-pole connector (1) from bucket harness connector.(2)Remove cable tie (2).(3)Cut level switch (3) wiring harness leads at both ends of splice.(3)Loosen one hose clamp (4) on cuff and clamp assembly (5).(4)Remove 10 locknuts (6), 20 flat washers (7), 10 bolts (8), and 10 clips (9) from left downspout (10). Lowerleft downspout (10) and remove from bucket union (11).(5)Loosen level switch hex shaft (12) from level switch housing in left downspout (10) and remove level switch(3) with remainder of level switch wiring harness.4-106
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
