TM 5-3740-218-13&P
HYDRAULIC RESERVOIR PRIMARY MANIFOLD ASSEMBLY REPAIR (CONT)
B. DISASSEMBLY
(1) Remove primary manifold (1) from hydraulic tank mounting studs (2) by removing four nuts (3) and four
washers (4).
(2) Remove and discard O-ring (5).
(3) Remove fitting (6) from 10-micron filter housing assembly (7).
(4) Remove and discard 10-micron filter (8) from filter housing assembly (7). Remove filter housing assembly from
fitting (9).
(5) Remove fitting (10) from reservoir tank (11).
(6) Remove drain pipe (12) from brass gate valve (13).
(7) Remove brass gate valve (13) from fitting (14).
(8) Remove fittings (14 and 15) from reservoir tank (11).
(9) Remove reservoir sight gage (16).
(10) Remove reservoir filler breather cap (17) and remove six slotted-head screws (18).
(11) Remove plug (19).
4-86
