TM 5-3740-218-13&P4-33.BATTERY ASSEMBLY REPLACEMENTThis task covers:RemovalInstallationA.INITIAL SETUPTools and Special Equipment:Tool Kit, 5180-00-177-7033General Safety Instructions:WARNINGAll electrical switches must be OFF before disconnecting orconnecting battery cables. Shorting or arcing could causeserious burns.Battery electrolyte is an acid, and is highly corrosive.Wear rubber gloves, face shield, and apron. Do not spillon clothing, skin, or PDU. Wash exposed areas with water.Seek medical assistance. Failure to do so could result inpersonal injury.B.REMOVALWARNINGAll electrical switches must be OFF before disconnecting battery cables. Shortingor arcing could cause serious burns.Battery electrolyte is an acid, and is highly corrosive. Wear rubber gloves, faceshield, and apron. Do not spill on clothing, skin, or PDU. Wash exposed areaswith water. Seek medical assistance. Failure to do so could result in personalinjury.(1)Remove two wing nuts (1) and two washers (2) from battery cover weldment (3). Remove cover weldment.(2)Disconnect two battery cables (4) from battery (5) by removing two locknuts (6).(3)Remove four jam nuts (7), two insulator washers (8), and two flat washers (9) from two holddown bolts (10).(4)Remove holddown crossbar (11) and two holddown bolts (10). Remove battery (5) from battery pad (12).4-78
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
