TM 5-3740-218-13&P4-19. ENGINE AND PUMP ASSEMBLY REPLACEMENT (CONT)B.REMOVALWARNINGGasoline is flammable. Do not work on fuel system in presence of sparks andopen flame. Serious personal injury could result if fuel ignites.(1)Disconnect spark plug wire (1).(2)Shut off fuel at fuel strainer petcock (2).(3)Remove nut (3), washer (4), bolt (5), and adel clamp (6) securing fuel line (7).(4)Disconnect fuel line (7) from carburetor (8).(5)Remove bolt (9), washer (10), and adel clamp (11) securing throttle cable (12).(6)Disconnect throttle cable (12) from carburetor (8).(7)Disconnect and tag starter solenoid electrical leads (13).(8)Disconnect and tag six banana clip wires (14) from bucket harness.(9)Disconnect and tag four ground wires (15) from rear of engine case ground stud (16).(10)Disconnect inlet (17) and outlet (18) hydraulic hoses from hydraulic pump (19). Tag hoses and cap openhydraulic lines.(11)Disconnect engine assembly (20) from isolators (21) by removing four nuts (22), eight washers (23), andfour bolts (24).WARNINGEngine is heavy and cumbersome. Use two persons when lifting or movingengine to prevent personal injury.(12)Using two persons, lift engine assembly (20) free of isolators (21) and away from PDU.4-30
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
