TM 5-3740-218-13&P
KEY SWITCHBOX ASSEMBLY REPAIR (CONT)
C. ASSEMBLY
(1)
Install oil switch (1) to switchbox assembly front panel (2) by installing screw (3), lockwasher (4), and nut (5).
(2)
Insert key switch (6) through opening in front panel and secure with nut (7).
(3)
Insert fuseholder (8) through opening in front panel and secure with nut (9).
(4)
Install new grommet (10).
(5)
Attach four new male snap plugs (11).
(6)
Attach two new female snap plugs (12).
(7)
Run electrical leads (13) through grommet (10) and connect to fuseholder (8), key switch (6), and oil switch (1).
(8)
Align rectifier assembly (14) and install two bolts (15), two washers (16), and two nuts (17).
(9)
Align switchbox assembly front panel (2) and install four screws (18).
5-10
