TM 5-3740-218-13&P
PUMP AND CROSSTUBE ASSEMBLE REPAIR (CONT)
B.
DISASSEMBLY
(1)
Remove hydraulic motor and chemical pump assembly (1) (para 4-42).
(2)
Remove strainer assembly (2).
(3)
Remove four clamps (3) and tygon tubing (4).
(4)
Remove spray system control assembly (5) (para 4-45).
(5)
Remove two clamps (6) and hose (7) from two 90-degree pipe elbows.
(6)
Remove gate valve (8) and ball valve (9).
(7)
Remove cuff and clamp assembly (10) from main crosstube weldment and remove two clamps (11) from
main boom weldment.
(8)
Remove two dump valve gaskets (12) from top of crosstube weldments. Discard gaskets.
(9) Remove vent hose (13) and 90-degree fitting (14) on right downspout (15).
4-110