TM 5-3740-214-14
Table 4-3. Troubleshooting Chart (Continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE OVERHEATS (Continued)
Step 3. Check oil level.
a. If oil level is higher than the full mark (F) on dipstick, remove drain pipe cap and
drain oil. The level must be kept between the low (L) and full (F) marks (near the
full mark). Go to Step 4.
b. If the oil level is near the full (F) mark, go to Step 4.
Figure 4-62. Carburetor
Step 4. Adjust main fuel needle valve on carburetor.
4-55